CDR ANZSCO Codes
ANZSCO 312311 Electrical Engineering Draftsperson
An electrical engineering draftsperson prepares drawings and plans for electrical systems in order to support an electrician or electrical engineer offshore. This specialized occupation under electrical engineering draftsperson ANZSCO code 312311 involves creating schematics, blueprints, and technical drawings for electrical circuits, assisting in design and layout of electrical systems, and performing intricate calculations. Registration or licensing may be required.
Skill Level
Level 2 or Equivalent
Skill Assessment Authority
EA (Engineers Australia) / AIM
Specializations of Electrical Engineering Draftsperson:
- Electrical Engineering Design Draftsperson
- Electrical Engineering Detail Draftsperson
- Electrical Engineering Drafting Officer
- Relays Draftsperson
- Substation Design Draftsperson
On the Skilled Occupation List of Electrical Engineering Draftsperson:
Due to its inclusion on the Australia skilled occupation list, the electrical engineering draftsperson Australia occupation (ANZSCO 312311) qualifies for a number of visa pathways:
- Subclass 189 – Skilled Independent Visa (points-tested pathway)
- Subclass 190 – State/Territory Sponsored Visa
- Subclass 491 – Skilled Work Regional (provisional) visa
- Subclass 485: Temporary Graduate Visa (Graduate Work Stream)
- Skills in Demand (SID) Visa: Core Skills stream (which, as of December 2024, replaced subclass 482 TSS)
- Subclass 186 – Employer Nomination Scheme (ENS): Direct Entry
- Subclass 494 – Skilled Employer-Sponsored Regional (provisional)
- Subclass 407: Training Visa
- Core Skills Occupation List (CSOL): Included among 456 eligible occupations (effective from December 2024)
- Medium to Long-Term Strategic Skills List (MLTSSL): Eligible for both temporary and permanent pathways
Not on the Occupation List of Electrical Engineering Draftsperson:
- 482 TSS Visa Short-Term List
- Excluded or Restricted Occupation list
Visa Provision for ANZSCO 312311 Electrical Engineering Draftsperson:
The occupation qualifies for any visa under the General Skilled Migration (GSM) Program since it is identified on the MLTSSL as a high-demand occupation in Australia.
Skilled Occupation & Visa Eligibility
Skilled Occupation | ANZSCO Code | Assessing Authority | 189 Visa | 190 Visa | 491 Visa (State/Family) | 186 Visa (DE) | 186 Visa (All Areas) |
Electrical Engineering Draftsperson | 312311 | Engineers Australia (EA) / AIM | ✅ | ✅ | ✅ | ✅ | ✅ |
Visa Processing Times – 75% of Applications (Months)
Visa Type | 189 | 190 | 491 | 485 | 186 (DE) | 186 (TRT) | 494 |
Time | 9 | 9 | – | 10 | 17 | 5 | 5 |
Visa Processing Times – 90% of Applications (Months)
Visa Type | 189 | 190 | 491 | 485 | 186 (DE) | 186 (TRT) | 494 |
Time | 12 | 12 | – | 15 | 19 | 11 | 11 |
Be mindful that the typical duration for skilled permanent visas, according to government data, is 13 months while employer-sponsored visas are frequently granted more quickly.
Skill Level Required for Electrical Engineering Draftspersons
The majority of jobs in this unit group have skill levels that match the credentials and background listed below:
1. In Australia:
AQF Associate Degree, Advanced Diploma or Diploma (ANZSCO Skill Level 2)
2. In New Zealand:
NZQF Diploma (ANZSCO Skill Level 2)
The above-mentioned official qualifications may be replaced by at least three years of relevant experience. In certain cases, in addition to the official qualification, relevant experience and/or on-the-job training may be necessary.
Occupations in this Group.
- 312311 Electrical Engineering Draftsperson
- 312312 Electrical Engineering Technician
Exceptions for Unit Group 3123
- Australian graduates are excluded from some states and territories.
- Priority Skilled Lists may be subject to specific requirements in some areas.
- The countries that are not required to submit their IELTS or OET results are the United States, Canada, New Zealand, the United Kingdom, and Ireland.
Unit Group 3123: Electrical Engineering Draftspersons and Technicians
Electrical Engineering Draftspersons and Technicians assist in electrical engineering research, design, manufacture, assembly, construction, operation and maintenance of equipment, facilities and distribution systemsThey populate schematics and schedules for electrical engineering projects such as substations, switchgear, conduit systems and motor control centers. Registration or licensing may be required.
Electrical Engineering Draftsperson Salary and Career Prospects in Australia
When selecting a career in electrical engineering, many professionals inquire about the electrical engineering draftsperson salary in Australia. Here’s a comprehensive breakdown of pay ranges across different experience levels:
Average Pay Range:
- Entry-level positions: AUD $60,000 – $70,000 per year
- Mid-career professionals: AUD $75,000 – $90,000 per year
- Experienced draftspersons: AUD $95,000 – $110,000+ per year
- Specialized senior professionals: AUD $115,000 to $130,000+ annually
Note: Geographic region (higher in urban locations like Sydney, Melbourne, and Perth), industry (mining and resources are highest), experience level, and project complexity are some of the elements that affect the electrical engineering draftsperson’s income.
Language Proficiency to be Eligible for Electrical Engineering Draftsperson
Test | Minimum Score Requirement |
IELTS | 6 in speaking, 7 in listening, reading, and writing, and 7 in OET overall |
OET | Minimum grade B in all sections |
TOEFL iBT | 12, listening 13 reading, 21 writing, and 23 speaking. Total: 93 |
PTE Academic | 50 (Listening, Reading, Writing), 65 in Speaking, 65 overall |
In situations where mandatory licensing or registration is required, you must demonstrate that you have a minimum IELTS score or its equivalent, whichever is higher, or that your level of English is adequate to meet licensing or registration criteria.
Electrical Engineering Draftsperson PR Pathway
Understanding your electrical engineering draftsperson PR points calculation is essential for successful migration. To apply for PR, the points system considers the following criteria for calculating your points total:
- Age (maximum 30 points)
- Proficiency in English (maximum 20 points)
- Skilled work experience (maximum 20 points)
- Academic record (up to 20 points)
- Australian study requirement (5 points)
- Specialist education qualification (10 points)
- Australian professional year (5 points)
- State/territory nomination (5-15 points)
- Partner skills (5-10 points)
Visa options for this occupation:
- Skilled Nominated Subclass 190
- Skilled Independent Subclass 189
- Skilled Work Regional Subclass 491
Similarly, you also potentially meet other employer-sponsored visa criteria if you have a firm job offer.
Course Details: Admission Requirements for the Electrical Engineering Draftsperson Program
To become a part of this profession, the aspirants should have completed their respective courses. Here are the standard electrical engineering draftsperson courses available:
Diploma Level (Most Common):
- Diploma of Engineering Technology – Electrical
- Advanced Diploma of Engineering – Electrical
- Diploma of Electrical Engineering
Associate Degree:
- Associate Degree in Engineering (Electrical)
- Associate Degree in Electrical Engineering Technology
These course qualifications typically cover:
- Electrical circuit design and analysis
- CAD software and technical drawing
- Electrical installation standards and regulations
- Power systems and distribution
- Instrumentation and control systems
- Health and safety in the electric environment of work
Many of these programs have a work placement component to prepare students for professional employment.
Skill Assessment Process
For migration to Australia in this occupation under electrical engineering draftsperson ANZSCO 312311, completing the skills assessment is crucial for General Skilled Migration visas. Key Points are given below:
- Assessment authority: Engineers Australia (EA) via the CDR pathway and AIM (Australian Institute of Management) for alternative assessments.
- Required: For all General Skilled Migration visa applications
- Validity: Indefinite with assessment authority; typically 3 years for Department of Home Affairs visa purposes.
- Process: Verifies qualifications (AQF diploma, advanced diploma, or associate degree in the relevant field), work experience, and English proficiency.
Six pathways for skills assessment by Engineers Australia:
Pathway A—If you hold an accredited qualification:
- Australian qualification pathway if you have completed your studies there and have an Engineers Australia-accredited degree
- Washington Accord qualification pathway if you are qualified from a nation that has ratified the Washington Accord in full.
- If your degree is from a nation that has ratified the Sydney Accord, you can use the Sydney Accord qualification road.
- Dublin Accord qualification track if your degree was earned in a nation that has ratified the Dublin Accord in full.
- You otherwise hold other recognised qualifications
Pathway B – If you hold a non-accredited qualification (CDR Pathway):
- Competency Demonstration Report (CDR) for applicants with non-accredited qualifications
- Three Career Episodes demonstrating engineering competencies
- Summary Statement mapping competencies to Engineers Australia Stage 2 Competency Standards
- Continuing Professional Development (CPD) statement
Tasks Include
Job responsibilities are varied and range from technical to design. Some of the major responsibilities that make up this occupation include:
- Develop wiring diagrams and layout drawings showing the location of all major electrical equipment.
- Support Electrical Engineers and Engineering Technologists in the preparation of drawings for electrical systems, including substation installations, cable systems, motor control centers and switchgear.
- Create diagrams or blueprints that display circuitry and the location of equipment, such as transformers, power boxes, and panel boards.
- Gather information, do experiments and difficult mathematics, graph results, and generate charts and tables.
- Prepare estimates of material costs and quantities for electrical engineering projects.
- Develop wiring diagrams and layout drawings showing the location of all major electrical equipment.
- Support Electrical Engineers and Engineering Technologists in the preparation of drawings for electrical systems, including substation installations, cable systems, motor control centers and switchgear.
- Create diagrams or blueprints that display circuitry and the location of equipment, such as transformers, power boxes, and panel boards.
- Gather information, do experiments and difficult mathematics, graph results, generate charts and tables.
- Prepare estimates of materials costs and quantities for electrical engineering projects.
Why is CDRAustraliaWriter the best service out there?
At CDRAustraliaWriter, we understand the customer’s needs and strive to fulfill them with the utmost importance, carefully drafting their application, resume writing, RPL reports, and CDR reports. When it comes to CDR services as our professional team of expert writers know exactly what they need to do for ANZSCO codes. According to Engineers Australia, we therefore assist the engineers on how to create an outstanding CDR report.
Our company delivers absolutely original content that meets the MSA specification.. We are well-versed in the technicalities of composing a CDR report and its compliance with all institutions standards, as Engineers Australia.
Professional Assistance for guiding professionals through the EA skill assessment process to ensure that your application is compliant and ready for successful migration to Australia.
Contact our customer service representative to learn more about and compare our pricing. We won’t disappoint you.
Get our free consultation
Do you have a question?
Get our free consultation with specialist and experienced counsellors. Explore our CDR writing packages immediately and receive 100% plagiarism free CDR report
Contact us right now! and Get your CDR report ready for approval.
Do you have a question?
We have mentioned common questions asked by our clients regarding CDR report, ACS RPL report, KA02 report, and skill assessment process.
It is a collection of specific papers used by Engineers Australia to evaluate an engineer’s competency in engineering skills and knowledge, management, communication, and leadership.
A draft copy is initially submitted to the customer for evaluation and approval. Following full payment, clients can access the final report.
Work on the project begins once the client pays a portion/half of the project’s cost.
Because we are a service-based organization, there is no money-back guarantee or policy for our CDR writing services.
CDR Australia Writer is a group of highly experienced CDR writers, engineers, and information technology professionals who will assist the clients while preparing CDR . Our team of CDR writing experts work together to guarantee that your CDR is correct, plagiarism-free, and customized for you so that you receive good feedback from Engineers Australia.